Terminals

While ME Pattern Providers, ME Import Busses, ME Storage Busses, and the et cetera are the primary method by which an AE2 network interacts with the world, Terminals are the primary method by which an AE2 network interacts with you. There are several variants with differing functions.

Terminals will inherit the color of the cable they are mounted on.

They are cable subparts.

Terminal Placement

As a terminal is often the first subpart someone might place, it is common to get it wrong and place the terminal backwards. Here is an example of what to do and what not to do:

You still have a terminal and an energy acceptor, except now the terminal is the right way around and actually connected to the network, and it all fits in a smaller space too.

Terminal Search

The searchbox accepts Regex terms, so you can, for example, write "gtceu:.*ore" to get all ores from Gregtech. Learning Regex is left as an exercise for the reader.

Terminal

Your basic terminal, allowing you to view and access the contents of your network's storage and request things from your autocrafting setup.

The UI

There are several sections of a basic terminal's UI

The center section gives access to your network's storage. You can put things in and take things out. There are several mouse/key shortcuts:

  • Left-click grabs a stack, right-click grabs half a stack.
  • If an item or fluid or etc. is able to be autocrafted, whatever you have bound to "pick block" (usually middle-click) brings up a UI to specify the amount to be crafted. You can also input formulas like 3*64/2, or type =32 to only craft the number of items needed to reach 32 in your storage.
  • Holding shift will freeze the displayed items in-place, stopping them from re-organizing themselves when quantities change or new items enter the system.
  • Right-clicking with a bucket or other fluid container will deposit the fluid, left-clicking a fluid in the terminal with an empty fluid container will withdraw the fluid.

The left section has settings buttons to:

  • Sort by different attributes like name, mod, and quantity
  • View stored, craftable, or both
  • View items, fluids, or both
  • Change the sort order
  • Open the detailed terminal settings window
  • Change the height of the terminal UI

On the right there are slots for View Cells

The top-right of the center section (hammer button) brings up the autocrafting status UI, allowing you to see the progress of your autocrafts and what each crafting CPU is doing.

Recipe

Crafting (Shapeless)

Crafting Terminal

The Crafting Terminal is similar to a regular terminal, with all the same settings and sections, but with an added crafting grid that will be automatically refilled from network storage. Be careful when shift-clicking the output!

You should upgrade your terminal into a crafting terminal ASAP.

The UI

The crafting terminal has the same UI as the regular terminal, but with an added crafting grid in the middle.

There are 2 additional buttons, to empty the crafting grid into network storage or your inventory.

Recipe

Crafting (Shapeless)

Pattern Encoding Terminal

The Pattern Encoding Terminal is similar to a regular terminal, with all the same settings and sections, but with an added pattern encoding interface. It looks similar to a crafting terminal's UI but this crafting grid doesn't actually perform crafts.

You should have one of these in addition to a crafting terminal.

The UI

The crafting terminal has the same UI as the regular terminal, added pattern encoding interface.

The pattern encoding interface has several sections:

A slot to insert Blank Patterns.

A big arrow to encode the pattern.

A slot for encoded patterns. Place a pattern that has already been encoded in this slot in order to edit it, then click the "encode" arrow.

4 tabs on the right to swap the type of pattern to be encoded between

  • Crafting
  • Processing
  • Smithing
  • Stonecutting

The central UI changes depending on the type of pattern to be encoded:

  • In crafting mode:

    • Left-click in or drag from JEI/REI the ingredients to form the recipe. Right-click to remove the ingredient.
    • Enabling substitiutions allows things like crafting sticks from any plank type. This should only be used when absolutely necessary.
    • Fluid substitutions allows using stored fluids in place of buckets of fluids.
    • You can also directly encode a pattern from the JEI/REI recipe screen.
  • In processing mode:

    • Left-click or right-click in or drag from JEI/REI the ingredients to specify the inputs and outputs of the recipe.
    • Right-click with a fluid container (like a bucket or fluid tank) to set that fluid as an ingredient instead of the bucket or tank item.
    • When holding a stack, left-click places the whole stack, right-click places one item. Left-click on an existing ingredient stack to remove the whole stack and right-click to decrement the stack by 1. Whatever you have bound to "pick block" (usually middle-click) lets you specify a precise amount of the item or fluid.
    • The output slots have a primary output and space for any secondary outputs you might want the autocrafting algorithm to know about.
    • Both input and output slots scroll, so you can have 81 different ingredients and 26 secondary outputs
    • You can also directly encode a pattern from the JEI/REI recipe screen.
  • The smithing and stonecutting mode UIs work similarly to a smithing table and stonecutter respectively.

Recipe

Crafting (Shapeless)

Pattern Access Terminal

The Pattern Access Terminal serves to solve a specific issue: in a dense tower of ME Pattern Providers and Molecular Assemblers, you can't physically access the providers to insert new patterns. Additionally, perhaps you're lazy and don't want to walk across your base to insert a pattern. The pattern access terminal allows access to all pattern providers on the network.

The UI

This terminal has a different UI to all the other terminals.

It has settings for terminal height and which pattern providers to show.

Each row in the terminal corresponds to a specific pattern provider.

Pattern providers in the terminal are sorted by what blocks they are connected to, or what name you have given them (in an anvil or with a Inscriber Name Press).

Recipe

Crafting (Shapeless)
Minecraft 1.20.5 [change]